Toyota

GSC Power Division Stem Seals Toyota  GSC Power-Division Viton Valve Stem Seals for Toyota 1JZ/2JZ Platforms. These are an upgrade from the standard OEM material to help cope with the higher heat caused by high performance engines. Sold as a set of 24

GSC Power-Division STD Size Intake Valve For 3SGTE

When creating our new valve line we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve. GSC Power-Division's new valves are sure to become the industry standard for sport compact performance valves.

Valve Features

• Swirl polished heads for smoother air flow over the valve

• Back cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures

• Valve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motion

• Intake valves are a modified 21-4n stainless and exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity

• Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear

• Valve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash

• We have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits

• Valves will work with an OEM keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving

GSC Power Division STD Size Exhaust Valve Toyota 3SGTE

When creating our new valve line we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve. GSC Power-Division's new valves are sure to become the industry standard for sport compact performance valves.

Valve Features

• Swirl polished heads for smoother air flow over the valve

• Back cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures

• Valve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motion

• Intake valves are a modified 21-4n stainless and exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity

• Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear

• Valve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash

• We have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits

• Valves will work with an OEM keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving

GSC Power Division Intake Valve GTE

When creating our new valve line we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve. GSC Power-Division's new valves are sure to become the industry standard for sport compact performance valves.

Valve Features

• Swirl polished heads for smoother air flow over the valve

• Back cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures

• Valve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motion

• Intake valves are a modified 21-4n stainless and exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity

• Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear

• Valve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash

• We have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits

• Valves will work with an OEM keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving

GSC Power-Division Super Alloy Intake Valves for the B58 and S58 Engines are for those running high horsepower, high EGT set ups that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have chrome polished stems to create a smooth, durable finish for added life and better lubricity, especially when paired with the GSC Manganese bronze valve guides. Strength, heat resistance, and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and backcut heads promote better air flow without sacrificing durability.

When creating our valves we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve.

Valve Features

• Swirl polished heads for smoother air flow over the valve
• Back cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures
• Valve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motion
• Intake valves are a modified 21-4n stainless
• Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
• Valve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash
• We have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits
• Valves will work with an OEM keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving

• Stem Diameter (mm)	Overall Length (mm)	Head Diameter (mm)
  5	99.55	30.1

GSC Power-Division Super Alloy Exhaust Valves for the B58 and S58 Engines are for those running high horsepower, high EGT set ups that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have chrome polished stems to create a smooth, durable finish for added life and better lubricity, especially when paired with the GSC Manganese bronze valve guides. Strength, heat resistance, and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and backcut heads promote better air flow without sacrificing durability.

GSC Power-Division Dual Valve Spring Kit with Titani9um Retainers for the Subaru 2015 WRX, BRZ and Scion FRS includes 16 titanium retainers, 16 dual valve spring sets, and 16 spring seats. This dual cylindrical set is made from the same high quality wire as our Beehive Kits and utilizes a Nano-peened finishing process to allow for the lowest possible fatigue loss rate. 

• Max RPM: 9,500 RPM
• Max boost: 50 psi

GSC Power-Division Single Cylindrical Valve Spring Kit with Ti Retainers for the Subaru 2015+WRX, BRZ, Scion FRS and Toyota FT86 using the new 2.0L NA boxer engine includes 16 titanium retainers, 16 cylindrical valve springs, and 16 spring seats. These round wire springs still have the same high quality attention to detail as our popular beehive kits. The GSC5756 is Nano-peened and batched according to seat pressure within our specs. The lightweight titanium retainers are CNC machined with tolerances and repeatability that are unmatched by other brands. This keeps a consistent seat pressure across the head for ultimate reliability and performance.

• Max RPM: 8,200 RPM
• Max boost: 20 psi

GSC Power-Division Single Cylindrical Valve Spring with Ti Retainer for Gen3 Toyota 3SGTE for shim under bucket includes 16 titanium retainers and 16 valve springs. This spring kit drops in with the OEM locator. These round wire springs still have the same high quality attention to detail as our popular beehive kits. The GSC5746 is Nano-peened and batched according to seat pressure within our specs. The lightweight titanium retainers are CNC machined with tolerances and repeatability that are unmatched by other brands. This keeps a consistent seat pressure across the head for ultimate reliability and performance.

• Max RPM: 8,200 RPM
• Max boost: 32 psi
• Use only Toyota OEM keeper part number: 90913-03021 for the 3SGTE. Do not swap with 2JZ keepers as height will change more than .020"/.5mm causing lower install pressure. 

GSC Power-Division Viton Valve Stem Seals for the Subaru/Toyota FA/FB Engine's

These are an upgrade from the standard OEM material to help cope with the higher heat caused increasing the performance of your engine.

Sold as a set of 16

FITMENT

GSC Power-Division Viton Valve Stem Seals for the Toyota 3S-GTE 6mm valve size seal set. These are an upgrade from the standard OEM material to help cope with the higher heat caused by high performance engines. Sold as a set of 16

GSC Power-Division CONICAL Valve Spring with Ti Retainer for Toyota 3SGTE for shimless/shim-over bucket includes 16 titanium retainers and 16 conical valve springs. High RPM and High Boost levels are not a problem on these kits. True conical valve springs are not a new concept and are industry proven to provide several key advantages over traditional spring designs. A major advantage of conical springs vs. traditional cylindrical or beehive springs is the damping and removal of valvetrain harmonics. Of the three designs, conical springs are the front runners in valvetrain harmonic stability. Utilizing a varying coil diameter as well as coil spacing, a conical spring acts as a natural harmonic damper in the transfer of valvetrain shock. This translates to less stress, less wear, and a longer life of the included components. This level of protection is needed in today’s engines being pushed to their physical and mechanical limits by aftermarket modifications. Every GSC conical spring offers a super finished surface treatment to go along with the patented, multi-step heat treatment process. The finished product is an extremely reliable, high-performance spring allowing the users to push higher RPMs, use more aggressive cam profiles, and turn up higher boost pressures.

• Max RPM: 10,000 RPM
• Max boost: 50 psi
• Use only Toyota OEM keeper part number: 90913-03021 for the 3SGTE. Do not swap with 2JZ keepers as height will change more than .020"/.5mm causing lower install pressure. 

GSC Power-Division Conical Valve Spring Kit with Ti Retainer for the Toyota G16E-GTS for the GR Yaris and Corolla includes 12 titanium retainers (6 Intake and 6 Exhaust) and 12 Conical valve springs and 12 new Spring Seats. 

True conical valve springs aren’t a new concept—they’ve been proven in the industry to offer several key advantages over traditional spring designs. One of the biggest benefits of conical springs compared to traditional cylindrical or beehive springs is their ability to dampen and eliminate valvetrain harmonics. Out of the three designs, conical springs lead the way in maintaining valvetrain harmonic stability.

Thanks to their varying coil diameter and spacing, conical springs act as natural harmonic dampers, absorbing the shock in the valvetrain. This means less stress, less wear, and a longer life for your engine components. This level of protection is essential for today’s engines, which are being pushed to their physical and mechanical limits.

Every GSC conical spring undergoes a super-finished surface treatment in addition to a patented, multi-step heat treatment process. The result? A super reliable, high-performance spring that lets you push higher RPMs and use more aggressive cam profiles with confidence.

If you’re looking to get the most out of your engine, GSC conical springs are the way to go. They’re built to perform, engineered to last, and designed to let you take your engine to the next level.

• Max RPM: 10,000 RPM
• Max boost: 60 psi

GSC Power-Division Viton Valve Stem Seals for the Toyota G16E-GTS Engine

These are an upgrade from the standard OEM material to help cope with the higher heat caused increasing the performance of your engine.

Sold as a set of 12

GSC Power-Division Intake Valve Guide for Toyota G16E-GTS, stopper style

• Standard sized sold as set of 6 or individually
• Oversized sold individually as +0.001" and +0.003"

GSC Power-Division Exhaust Valve Guide for Toyota G16E-GTS, stopper style

• Standard sized sold as set of 6 or individually
• Oversized sold individually as +0.001" and +0.003"

GSC Power-Division Viton Valve Stem Seals for Toyota 1JZ/2JZ Platforms. These are an upgrade from the standard OEM material to help cope with the higher heat caused by high performance engines. Sold as a set of 12

This includes the GTE (Turbo) and GE (non-turbo) versions along with the VVTi variants.

GSC Power-Division Beehive Spring Kit with Titanium Retainers for the Subaru 2015 WRX, BRZ and Toyota GT86 includes 16 titanium retainers, 16 beehive valve springs, and 16 spring seats. Our beehive spring utilizes advanced material heat treatment methods for superior load loss capabilities. These springs have the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring. Beehive springs allow for the use of a smaller, lighter retainer allowing for higher RPM and more valve control. This is absolutely the most lightweight, strongest spring kit for the FA20 platform

• Max RPM: 9,500 RPM
• Max boost: 35 psi