NISSAN VR38DETT Valves

GSC Power Division Intake Valve Guide for Nissan VR38DETT, stopper style GSC Power Division Valve Guide VR38DETT

• Standard sized sold as set of 12
• Oversized sold individually as +0.001" and +0.003" 

GSC Power Division Exhaust Valve Guide for Nissan VR38DETT, stopper style GSC Power Division Exhaust Guide VR38DETT

• Standard sized sold as set of 12 or individually
• Oversized sold individually as +0.001" and +0.003" 

Looking to push your Nissan GT-R VR38DETT past the 2200+ HP threshold? GSC Power Division answers the call with the new Flat Face +1mm Head Diameter Stainless Steel Performance Intake Valve. Engineered for extreme airflow, efficiency, and durability under the most punishing conditions.

• Optimized for Extreme Horsepower: Specifically designed to handle the heat and stress of VR38DETT engines pushing 2200+ HP. These valves are built from 21-4N Stainless Steel material, giving them unparalleled resistance to high temperatures and stress.
• Back Cut for Maximum Airflow: The expertly engineered back cut design improves exhaust flow, increasing power output and allowing for higher RPMs—perfect for racing and high-performance setups.
• Micro-Polished Valve Stems: Reduce friction and improve oil retention with micro-polished valve stems, ensuring smoother operation and extending the life of your components, even at peak RPMs.
• Precision Fit with OEM Components: These valves integrate seamlessly with the VR38DETT’s OEM keepers/ locks, and standard aftermarket retainers. GSC Power Division recommends upgrading to new valve locks to prevent material grooving and maximize longevity.

Built for Racers, Designed for Durability

When your engine demands more power and precision, these Stainless Steel Performance Intake Valves deliver. Whether you're hitting the track or upgrading your street machine, these valves provide the reliability and performance you need at extreme HP levels.

• +1mm Head Diameter: For enhanced airflow and increased power potential.
• Sold Individually or in Sets of 12: Whether you need a single replacement or a full set, GSC has you covered.

Looking to push your Nissan GT-R VR38DETT past the 2200+ HP threshold? GSC Power Division answers the call with the new 6.6mm Valve Stem +1mm Head Diameter Super Alloy Performance Exhaust Valve. Engineered for extreme airflow, efficiency, and durability under the most punishing conditions.

• Optimized for Extreme Horsepower: Specifically designed to handle the heat and stress of VR38DETT engines pushing 2500+ HP. These valves are built from advanced super alloy materials, giving them unparalleled resistance to high temperatures and stress.
• Back Cut for Maximum Airflow: The expertly engineered back cut design improves exhaust flow, increasing power output and allowing for higher RPMs—perfect for racing and high-performance setups.
• Micro-Polished Valve Stems: Reduce friction and improve oil retention with micro-polished valve stems, ensuring smoother operation and extending the life of your components, even at peak RPMs.
• Precision Fit with OEM Components: These valves integrate seamlessly with the VR38DETT’s OEM keepers, locks, and standard aftermarket retainers. GSC Power Division recommends upgrading to new valve locks to prevent material grooving and maximize longevity.

Built for Racers, Designed for Durability

When your engine demands more power and precision, these Super Alloy Performance Exhaust Valves deliver. Whether you're hitting the track or upgrading your street machine, these valves provide the reliability and performance you need.

• +1mm Head Diameter: For enhanced airflow and increased power potential.
• Sold Individually or in Sets of 12: Whether you need a single replacement or a full set, GSC has you covered.

GSC Power Division Intake Valve Guide for Nissan VR38DETT, stopper style GSC Power Division spring Guide VR38DETT 

• Standard sized sold as Singles
• Oversized sold individually as +0.001" and +0.003" 

GSC Power Division spring Guide VR38DETT

When creating our new valve line we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve. GSC Power Division Short Intake Valve new valves are sure to become the industry standard for sport compact performance valves.

Valve Features

• Swirl polished heads for smoother air flow over the valve
• Back cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures
• Valve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motion
• Intake valves are a modified 21-4n stainless and exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity
• Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
• Valve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash
• We have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits
• Valves will work with an OEM keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving
• Valve tip lengths - we have taken extra time to adjust tip heights on this application to require less tipping of the valve to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash. The GSC2056-01, GSC2056-12 valve protrusion has been shortened by .15mm to reduce the need to tip the valves on cylinder heads that are receiving a valve job. For directl factory replacement, where a valve job is not being performed, please use part number GSC2050-01 or 2050-12

GSC Power-Division Super Alloy Exhaust Valves for Nissan VR38DETT are for those running high horsepower, high EGT set ups that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have chrome polished stems to create a smooth, durable finish for added life and better lubricity, especially when paired with the GSC Manganese bronze valve guides. Strength, heat resistance, and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and back cut heads promote better air flow without sacrificing durability.

GSC Power-Division Super Alloy Exhaust Valves for Nissan VR38DETT are for those running high horsepower, high EGT set ups that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have chrome polished stems to create a smooth, durable finish for added life and better lubricity, especially when paired with the GSC Manganese bronze valve guides. Strength, heat resistance, and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and back cut heads promote better air flow without sacrificing durability. 

GSC Power-Division Conical Valve Spring Kit with Titanium Retainer for the Nissan VR38DET comes complete with 24 titanium retainers, 24 conical valve springs, and 24 valve spring shims. Conical valve springs, although not a new concept, have proven themselves in the industry, offering several key advantages over traditional spring designs.

One of the primary benefits of conical springs compared to cylindrical or beehive springs is their superior ability to dampen and eliminate valvetrain harmonics. Among these designs, conical springs stand out as frontrunners in ensuring valvetrain harmonic stability. By incorporating varying coil diameters and spacing, conical springs naturally act as harmonic dampers, effectively reducing valvetrain shock. This results in decreased stress, minimized wear, and prolonged lifespan of the included components, a crucial level of protection for modern engines pushed to their physical and mechanical limits by aftermarket modifications.

Each GSC conical spring undergoes a meticulous process, featuring a super-finished surface treatment in addition to our patented, multi-step heat treatment. The result is an exceptionally reliable, high-performance spring that enables users to push higher RPMs, utilize more aggressive cam profiles, and increase boost pressures with confidence.

• Max RPM:  10,000 RPM
• Max boost: 40 psi
• 1,500 HP