GSC S2 Camshafts – 5.0L Coyote Gen 3 2018–2023 Mustang 5.0
GSC7073S2
- Low stock - 8 items left
- Backordered, shipping soon
When you want the Coyote to live on the big end, run S2. The GSC S2 profile is an aggressive street/strip cam set designed to carry power hard to 8,100 rpm on OEM-port heads. Ramps and events are modeled against real Gen 3 port behavior and rocker geometry, then cut from our U.S.-made forged billet blanks and finished with BLACK ISE for reduced friction and long life. Built for pump gas, race fuel, or ethanol blends (E85/E90), with a powerband that comes on at ~5,800 and pulls through 8,500 rpm. Direct Injection note: the high-pressure fuel pump (DI/HPFP) lobe is maintained to OEM specification—stroke and timing are retained for proper pump operation.
Expect stronger top-end than S1 and a rowdier character. This set is for builds that prioritize trap speed and track numbers over commuting manners. Tuners typically keep VCT online within a tighter phasing window for best results at high rpm.
Highlights
- Profile intent: Aggressive Street/Strip with stronger top-end on OEM-port heads
- Fuel: Pump gas, race fuel, E85/E90
- Peak power: ~8,100 rpm · Powerband: 5,800–8,500 rpm
- Valve springs: Upgrade required (use GSC-matched springs; Ti retainers recommended)
- VCT: Tuner-managed phasing window recommended for high-rpm stability
- DI fuel pump lobe: Maintains OEM lobe data for correct HPFP stroke/timing; compatible with factory and most upgraded DI pumps
- Manufacturing: MADE IN THE USA; forged from proprietary U.S.-sourced bearing-grade steel, BLACK ISE surface treatment, CNC to tighter-than-OEM tolerances
- Fitment: 2018–2023 Mustang GT 5.0L
Tuning & Install Notes
- Clearance: Always verify piston-to-valve clearance with your exact heads/pistons/gasket stack. With OEM pistons and deck heights, the full phaser range is usable without clearance issues.
- Use upgraded valve springs (and Ti retainers) set to the tuner’s rev limit; check installed height and coil bind
- See install sheet for torque sequence and procedures; prime oiling and fuel (HPFP follower inspection) on reassembly
- BLACK ISE-coated lobes ship ready to install.
Camshaft Specifications – GSC S2 (Gen 3 Coyote)
| Cam | Advertised Duration | Duration @ .050" | Centerline (CL) | Max Lift | VTC Timing @ Peak Power |
|---|---|---|---|---|---|
| Intake | 292° | 239° | 120° | .560" | 115.5° ATDC |
| Exhaust | 316° | 252° | 138° | .560" | 115° BTDC |